Questions and answers about electric surfing

Yes. The Fliteboard is classified as a small craft and not a personal watercraft. It can therefore also be used freely outside of jet ski routes.

There is a labeling requirement on federal shipping lanes (rivers). The license plate is attached to the board in 10 cm large letters. We are happy to support you in the allocation of an official number plate.

Yes. The Fliteboard is not subject to the labeling requirement here.

The Fliteboard has approx. 3.67 KW (5HP). A sports boat license is only required for boats over 11 kW (15 hp). The only exception is the Rhine. There you need a sports boat license for the Fliteboard.

This is different. There is no uniform regulation on the lakes. Therefore, inquiries must be made to those responsible on site.

Yes, please have a look at our blog about it.

Insurance for your eFoil Surfboard or Jetboard

Check out our video guide for full instructions on getting your Fliteboard up and running:

Regular care and maintenance is important to keep your Fliteboard in perfect condition.

You can find important care instructions for your eFoil Fliteboard here

Also watch the following video for important care and maintenance instructions as well as some tips and tricks:

• Store the Flitecell out of the reach of children and pets.
• DO NOT store the Flitecell near heat sources such as a stove or heater.
• DO NOT leave the Flitecell inside a vehicle on a hot day. The ideal storage temperature is 22°C – 28°C.
• Disconnect the charger when not in use.
• DO NOT store the battery fully charged or fully discharged for long periods of time. If you plan not to use the Fliteboard within the next 4 weeks, make sure the charge level is between 25% and 75%. Otherwise, the lifespan and performance may be reduced.

Keep your Fliteboard up to date with the latest software. The Flite app is available for the iPhone and soon for the Android operating system. Watch this instructional video before downloading the app:

Sure, of course. We always have customers who want to sell their Fliteboard to buy a smaller or newer model. Feel free to contact us about the topic “Fliteboard used”!

The Fliteboard has a price of €12,971.00 – €13,893.25, depending on the setting. The price of the Fliteboard is influenced by the size of the battery, the color of the eFoil and the wing setting.

Yes. The Radinn is classified as a personal watercraft/jet ski. Thus, it may be used freely within jet ski routes and outside the jet ski routes for touring.

There is a labeling requirement on federal shipping lanes (rivers). The license plate is attached to the board in 10 cm large letters. We are happy to support you in the allocation of an official number plate.

The Fliteboard has about 9 KW. A sports boat license is only required for boats over 11 kW (15 hp). The only exception is the Rhine. There you need a sports boat license for the Radinn.

Yes, please have a look at our blog about it.

Insurance for your eFoil Surfboard or Jetboard

All Radinn batteries and jetpacks ship with factory settings and must go through manual onboarding to become activated.

ONBOARDING PROCEDURES:
1) Carefully insert the fully charged battery into the jetboard using the front and rear handles. The magnet of the leash must NOT be connected at this point. If you received a new jetpack, insert it into the board before inserting the battery.
2) Download the Radinn app and log in. Register as a new user or log into your existing account. Hold the device in your hand and follow the steps outlined in the app.
3) When the board is connected to the app, it will check for firmware updates. When the update is complete, the jetpack and battery will be decoupled.
4) You have more than one battery? Install the extra batteries and repeat steps 1-3.
5) Let’s go!

While out of the water, carefully insert the fully charged battery into the jetboard using the front and rear handles. Attach the leashes to your ankle and the magnet to the back of the board. Now you can connect your board with the Bluetooth remote control – press the trigger for a few seconds until the LEDs light up. Once connected, the LEDs will stop flashing and you can hit the water with your board to get started.

The battery is designed to be snug and some pressure may be required when inserting and removing. After inserting the battery, lock the three handles. If a grip isn’t 100% tight and you don’t hear a click, don’t put the Radinn in the water. Please contact us for further procedure.

Insert the magnet of the board leash into the holder provided on the back of the board. Press the controller’s throttle stick all the way down (up to 5 seconds) until the LED lights start flashing. When the lights stop blinking and stay solid, the handheld controller is paired with the board.

When the controller is not connected to the board, the flashing LED lights indicate the controller’s charge level. When the controller is paired with the Radinn board, the LED lights indicate the battery level.

After your ride is finished and the battery is removed, attach the rubber connector protector to the jetpack and use the Radinn water bottle to rinse the board with fresh water.

Also check the jet tunnel and carefully remove any possible algae or debris that may have gotten caught in it during your ride.

In order to use the full potential of your Radinn battery, you should run the “Battery Optimization” function after each ride (see FAQ “What is the Battery Optimization function on the Radinn?”).

– Always fully charge the battery before storing it.

– Store the battery in a room with dry air at room temperature (15-28 °C).

– DO NOT leave the charger connected to the battery unless it is being actively charged or optimized (warranty void).

– DO NOT store the battery in the jetboard, as this will lead to deep discharge of the battery, which will permanently destroy the battery cells (warranty will be void).

– Fully charge your battery regularly (at least every other month) when storing the battery off-season to avoid the battery self-discharging to an unrecoverable level (warranty voided).

– Fully charge the battery before using the board.

– To use the full potential of your Radinn battery, you should run the “Battery Optimizer” function after every ride.

– Never fully discharge the battery.

– Note: If you bought the Speed ​​Charger as an add-on, we still recommend that you use the standard charger as much as possible.